News

Drum-type washing machine drum only one-way

Drum-type washing machine drum only one-way
When this failure occurs, first after you apply a screwdriver to unscrew the washing machine the fastening screws on the cover plate and remove the rear cover plate, check whether the motor control wire or the plug/socket properly. Because if there is a set of control wire plug/socket connection is bad or loose, it will cause the motor can only go in one direction, the other side stops to spin out of control. Control wires connect the plug, socket, or, just fine. Next, open the cover, check program-(p) control motor control circuit wire output is normal, whether there is a set of plug/socket connection is bad or loose, which may cause can only turn in one direction to the other party in a stopped state and, if so, only need to be connected and working. Finally, check for mechanical programmable switch steering contact failure or motor control switch malfunction, make the control wire of the motor set in changtong State, while another group is in a closed state, which may cause, constantly turning in one direction only, so you may need a new program.
BACK
Maintenance services
map
CONTACT:
Ji'Nan Jiexun Appliance Repair Center
TEL:
0531-8269111
FAX:
0531-8269111
E-mail:
service@jianjixie.com

© jianjixie.com All Rights Reserved. E-mail: service@jianjixie.com